HP XP Continuous Access Software - Manual (Page 186)

7. At the primary site, mount the P-VOL using the enas_fsmount command in NAS Blade
Manager, and create CIFS/NFS shares using the enas_nfscreate and enas_cifscreate
commands.
8. At the primary site, restart the program that accesses the P-VOL.
9. At the secondary site, connect the target file system to the NAS package.
•
Non-LVM:
sudo horc_svol_import -f Target-file-system-name -d Device-file-number
•
LVM:
sudo horc_svol_vmimport -f Target-file-system-name -d Device-file-number ,
...
10. At the secondary site, mount the S-VOL using the enas_fsmount command. Create a shared
directory using the enas_dircreate command, or change the attributes of a shared directory
using the enas_diredit command. Create CIFS/NFS shares using the enas_nfscreate
and nas_cifscreate commands.
NOTE: When the S-VOL is the file system managed by NAS/Sync Image, mount the
differential-data snapshots using the syncmount command, and create the CIFS/NFS shares
using the enas_nfscreate and enas_cifscreate commands, if necessary.
11. At the secondary site, start the program that accesses the S-VOL.
Online backup
To split the XP Continuous Access Journal volume pair with online backup:
1. At the primary site, prevent NAS Sync Image from performing operations on the P-VOL, hold
the write request to the P-VOL, and write the unapplied data to the disk.
sudo horc_pvol_freeze -f Source-file-system-name
2. At the primary site, split the XP Continuous Access Journal volume pair.
sudo pairsplit {-g group-name |-d volume-name } -rw
3. At the primary site, verify that the XP Continuous Access Journal volume pair has been split.
sudo pairvolchk {-g group-name |-d volume-name }
NOTE: You can also use the pairevtwait command, which waits for the pair to be split
(PSUS).
pairvolchk : Volstat is P-VOL.[status = COPY] => Splitting
pairvolchk : Volstat is P-VOL.[status = PSUS] => Split completes
4. At the primary site, permit the write request to the P-VOL, and enable the operations from NAS
Sync Image on the P-VOL.
sudo horc_pvol_unfreeze -f Source-file-system-name
5. At the secondary site, connect the target file system to the NAS package.
•
Non-LVM:
sudo horc_svol_import -f Target-file-system-name -d Device-file-number
•
LVM:
sudo horc_svol_vmimport -f Target-file-system-name -d Device-file-number ,
...
6. At the secondary site, mount the S-VOL using the enas_fsmount command.
186 XP Continuous Access Journal operations with NAS Blade