HP XP Continuous Access Software - Manual (Page 34)

Table 3 XP Continuous Access Journal data volume pair status (continued)
Secondary data volume
access Primary data volume
access Description Pair status
Read Only Read / Write XP Continuous Access
Journal monitors the total
amount of data in the
journal volume. If the
amount of data exceeds
the threshold (80%), the
pair status changes from
COPY or PAIR to PFUL.
The write data that
inflows is monitored
during the specified time
(Data Overflow Watch).
You can use XP
Command View
Advanced Edition
Software or XP Remote
Web Console to set the
monitoring time period
(the default is
60 seconds).
1
NOTE: XP RAID
Manager displays the
PFUL status. XP Command
View Advanced Edition
Software or XP Remote
Web Console displays
this status as PAIR.
PFUL
Read Only; Read /
Write, if write option is
enabled (Disable is the
default). Read / Write If the time period exceeds
the specified monitoring
time period, the pair
status changes from PFUL
to PFUS, and the pair is
suspended.
NOTE: XP RAID
Manager displays the
PFUS status. XP
Command View
Advanced Edition
Software or XP Remote
Web Console displays
this status as PSUS.
PFUS
Read / Write Read Only Data can be written to the
secondary data volume
that is reassigned from
the primary data volume
during resynchronization
processing (Takeover).
NOTE: XP RAID
Manager displays the
SSWS status. XP
Command View
Advanced Edition
Software or XP Remote
Web Console displays
this status as PSUS or
PSUE.
SSWS
Read Only Read / Write Suspending
34 Overview of XP Continuous Access Journal