HP XP Continuous Access Software - Manual (Page 193)

Commands
The commands the Hitachi Network Attached Storage series products provide for XP Continuous
Access Journal operations in the NAS Blade system are as follows:
•
Commands that NAS Backup Restore provides:
horc_devlist ◦
◦ horc_logremove
◦ horc_printenv , horc_setenv , horc_unsetenv
◦ horc_pvol_freeze
◦ horc_pvol_unfreeze
◦ horc_svol_define , horc_svol_vmdefine
◦ horc_svol_delete , horc_svol_vmdelete
◦ horc_svol_import , horc_svol_vmimport
•
Commands that NAS Blade Manager provides:
enas_cifscreate , enas_cifsdelete ◦
◦ enas_dircreate , enas_diredit
◦ enas_fscreate , enas_fsdelete , enas_fslist , enas_fsmount , enas_fsumount
◦ enas_nfscreate , enas_nfsdelete
•
Commands that NAS Sync Image provides:
◦ syncdel , synclist , syncmount , syncstop , syncumount
For details about these commands, see the NAS Backup Restore User's Guide, NAS Blade Manager
User's Guide, and NAS Sync Image User's Guide.
Messages
For details about output messages after inputting commands described in Commands , see the NAS
Backup Restore User's Guide, NAS Blade Manager User's Guide, and NAS Sync Image User's
Guide.
Notes on failures of external volumes
If a problem (including a temporary problem, for example, the cable connection cut out) occurs to
the external volume that is currently used with XP Continuous Access Journal volume pair, perform
the following processes:
1. If the external volume cannot be used successfully, delete the XP Continuous Access Journal
volume pair using the
pairsplit -S command.
If the S-VOL is not connected to the NAS package, release the device file used in the target
file system using the
horc_svol_delete (non-LVM) or horc_svol_vmdelete (LVM)
command.
2. Confirm all XP Continuous Access Journal volume pair statuses that are using the external
volume with problems using the
pairdisplay command.
If the status of the XP Continuous Access Journal volume pair is PSUE, delete the volume pair
using the
pairsplit -S command.
If you delete the XP Continuous Access Journal volume pair when the S-VOL is not connected
to the NAS package, release the device file used in the target file system using the
horc_svol_delete (non-LVM) or horc_svol_vmdelete (LVM) command.
Commands 193