Canon VB-C60 - Manual (Page 66)

3-14
Set the [Settings] Tab
Start or Stop the Storage Server Program
Click [Stop Storage Server] to stop the Storage Server.
Click [Start Storage Server] to start the Storage Server.
Change the [Logon settings]
1. If you need to log onto the Storage Server with another account when using a network drive, click [Stop
Storage Server].
After the Storage Server stops, click [Logon settings].
The [Log on as] dialog appears.
2. If you are logging onto the Storage Server with a [Local System account], select [Local System account]. If
you are log onto the Storage Server with another account, enter the account name in [This account] and
password in [Password] and confirm password.
3. Click [OK].
4. Click [Start Storage Server] to start the Storage Server with the specified account.
Note
If you need to stop the Storage Server Program, you should inform all users connected to the storage server
before you stop the storage server.
Note
If you are using VK-64/VK-16 with NAS server, you need to set up log-on settings again after upgrading VK
from v1.3, v1.4, v2.0 or v2.1 to v2.2.