Canon VB-C60 - Manual (Page 123)

4-43
Change Camera Server Settings
R
e
gi
ste
r C
a
m
e
ra
Se
rv
er
and
Set
R
e
co
rdi
ng
Sche
du
le
Preset
• Presets should be set on the Camera Server in advance. You cannot set them with VK-64/VK-16.
• If the recording settings using a preset are used on the Camera Server, the preset position will
override camera positions set by VK-64/VK-16, including those in recording schedules and Camera
Server position. The camera control will be lost when starting to control the camera at the Camera
Server.
• If predefined presets are not shown in the [Preset] drop-down menu even though they have been
defined on the Camera Server, click [Get Camera Control] to display the [Camera Control] Panel,
obtain camera control, then configure the settings again.
Restrict Service Time
• If a Camera Server has been configured with [Service time restricted] enabled, VK-64/VK-16 will be
able to record from the Camera Server during restricted times.
External Device
• Specify the name of the external device, such as sensor name. You cannot configure it with VK-64/
VK-16.
• If the external device is not set on the Camera Server, VK-64/VK-16 cannot configure it.
Sensor Input, Recording to Camera Memory
• Camera Servers have certain features to capture image into its memory based on sensor input or
schedule. If settings are enabled on the Camera Server, those settings take precedence.