Canon VB-C60 - Manual (Page 114)

4-34
Set Normal Schedule
Select a day of the week to record video
In the [Repeat on] area, check the days you wish to repeat the recording period you have set in the [Times]
area above.
Set Continuous Recording
1. Click the [Continuously at Max.] box if you want to set continuous recording for the duration of the time
period.
2. Select a frame rate for recorded video from the drop-down menu, or input a value from the keyboard.
You can set the frame rate from 0.1 frames per second to 30 frames per second. The default is 5 frames par
seconds. The upper limit is 5 frames per second with VK-Lite.
See P. 4-45 for details of Continuous Recording.
Configure Motion Detection Recording and Sensor Recording Settings
1. Check the [On motion detection] box if you want recording activated when motion is detected during this time
period.
2. Check the [On sensor event] box if you want recording activated from a sensor event during this time period.
3. Click [Settings] to change the details.
See P. 4-45 and P. 4-53 for details of Motion Detection and Sensor Event recordings.
Note
z If you have defined any special day schedules, at that time the schedules will override normal schedule
times for the whole day.
z Times are given in 24 hours.
z If Camera Server has been configured with [Service time restricted], VK-64/VK-16 will not be able to
record from the Camera Server during restricted times.
z The time zone used for the recording schedule will be the time of PC where the Storage Server is running.
z The Storage Server will adjust for Daylight Savings if configured in the operating system.