West Control Solutions MRC 9000 - Manual (Page 8)

Section 1 1-2 Edition 3
Rev G
1.2 INSTALLATION OF PEN CARTRIDGE ASSEMBLY
Remove the pen cartridge assembly from its shipping container. With mounting tab on the bottom, slide the pen
cartridge assembly (item 2 on Figure 1-1) into the print actuator (item 1 on Figure 1-1).
FIGURE 1-1
1 2 3 4 5 6 7 8
INSTALL PEN
CARTRIDGE (2)
PRINT ACTUATOR (1)
PRINT ACTUATOR
TRAVERSE CABLE
PLASTIC CHART SHIELD
(DO NOT REMOVE)