1 resetting to factory setting – West Control Solutions Pro-16 User Manual
Page 86

Safety notes
9499-040-093811 / 59537-1
86
Page 86 of 88
9499-040-0
Pro-16
13.1
Resetting to factory setting
In case of faultyconfiguration, KS20-1 can be reset to the default condition.
1
ÈÌ
+ Power on
2
И
3
Щ
4
1 For this, the operator must keep the UP and DOWN keys pressed during
power-on.
2 Then, press UP key to select YES.
3 Confirm factory resetting with Enter and the copy procedure is started
(display COPY).
4 Afterwards the device restarts.
In all other cases, no reset will occur (timeout).
g
If one of the operating levels was blocked and the safety lock is open, reset to
factory setting is not possible.
g
If a pass number was defined (via BlueControl® ) and the safety lock is open, but no
operating level was blocked, enter the correct pass number when prompted in 3. A
wrong pass number aborts the reset action.
g
The copy procedure ( COPY) can take some seconds. Now, the transmitter is in
normal operation.
- 2300 (18 pages)
- 3300 (2 pages)
- 4100+ (177 pages)
- N4100 (79 pages)
- N4400 (38 pages)
- N6500 (2 pages)
- N6600 (114 pages)
- N8800 (88 pages)
- N8840 (90 pages)
- 9300 (2 pages)
- 9500 (24 pages)
- D280-1 (49 pages)
- KS 40-1 (60 pages)
- KS 40-1 Burner (40 pages)
- KS 45 (76 pages)
- KS 50-1 (72 pages)
- KS 90-1 (84 pages)
- KS 90-1 Programmer manual (84 pages)
- KS 94 (44 pages)
- ProVU 4 (184 pages)
- Pro-8 (72 pages)
- Pro-4 (84 pages)
- ProEC44 (274 pages)
- CI 45 (60 pages)
- SG 45 (56 pages)
- DataVU 5 (136 pages)
- DataVU 7 (208 pages)
- MRC 5000 Controller Manual (32 pages)
- MRC 5000 Recorder Manual (32 pages)
- MRC 7000 Controller Manual (74 pages)
- MRC 7000 Recorder Manual (64 pages)
- MRC 7000 Profiler Manual (84 pages)
- MRC 8000 (76 pages)
- MRC 9000 (318 pages)
- N8080 (for 1xxx) (40 pages)
- N8080 (for 2xxx) (39 pages)
- TB 40-1 Temperature Limiter (32 pages)
- TB 40-1 Temperature Monitor (32 pages)
- TB 45 Temperature Limiter (51 pages)
- TB 45 Temperature Monitor (52 pages)
- CALogix (44 pages)
- KS 800 Operating Instructions (36 pages)
- KS 800 ISO1745 Interface Manual (34 pages)
- KS 800 Profibus Interface Manual (52 pages)