KROHNE OPTISONIC 7300 EN - Manual (Page 66)

6
OPERATION
66
OPTISONIC 7300
www.krohne.com 09/2012 - 4001102303 - MA OPTISONIC 7300 R03 en
6.3.2 Menu B, test
No. No. No. No. Function Function Function Function Settings / descriptions Settings / descriptions Settings / descriptions Settings / descriptions
simulation
B1 simulation Displayed values are simulated.
B1.1 volume flow Volume flow simulation.
1. Set value; unit selection in Fct. C5.7.2 / Cancel (exit function
without simulation)
2. Query: start simulation?
no (exit function without simulation) / yes (start simulation)
B1.2 velocity of sound Velocity of sound simulation, sequence and settings similar to B1.1,
see above!
X stands for one of the connection terminals A, B, C or D.
stands for Fct. no. B1.3...1.6.
B1. current in X Simulation X
X stands for one of the connection terminals A, B, C or D.
Sequence and settings similar to B1.1, see above!
The pulse setting is provided at the output during one second.
B1. current out X
B1. pulse out X
B1. frequency output X
B1. control input X
B1. limit switch X
B1. status output X