Brocade FastIron SX Series Chassis Hardware Installation Guide - Manual (Page 95)

Managing the Chassis and Modules
● Overview......................................................................................................................... 93
● Displaying chassis status and temperature readings......................................................93
● Managing the cooling system..........................................................................................97
● Displaying the Syslog configuration and static and dynamic buffers............................ 103
● Syslog messages for PCI (hardware) errors................................................................. 105
● Managing the switch fabric modules (FSX 800 and FSX 1600 only)............................ 105
● Displaying management module CPU usage............................................................... 106
● Removing MAC address entries................................................................................... 106
Overview
This chapter contains information about refining the configuration of, monitoring, and managing the
hardware components.
Displaying chassis status and temperature readings
You can display the following information about your Brocade device:
• Status of the power supplies
• Status of the fans
• Temperature readings and thresholds of the management and interface modules
• Temperature readings and thresholds of the switch fabric modules (FSX 800 and FSX 1600 only)
• The MAC address of the chassis
The following shows an example of the show chassis command output on the FSX 800.
device# show chassis
Chassis Type: FastIron SX 800
Power supply 1 not present
Power supply 2 not present
Power supply 3 (H1250C - AC - Regular) present, status ok
Power supply 4 not present
Fan 1 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 2 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 3 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 4 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 5 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 6 ok, speed (auto): 1<->[[2]]<->3<->4
Fan controlled temperature:
Rule 1/3 (MGMT CARDS THERMAL PLANE): 41.5 deg-C
Rule 2/3 (LINE CARDS THERMAL PLANE): 44.0 deg-C
Rule 3/3 (SWITCH FABRIC CARDS THERMAL PLANE): 49.5 deg-C
Fan speed switching temperature thresholds:
Rule 1/3 (MGMT CARDS THERMAL PLANE):
Speed 1: NM<----->57 deg-C
Speed 2: 48<----->58 deg-C
Speed 3: 49<----->59 deg-C
Brocade FastIron SX Series Chassis Hardware Installation Guide 93
53-1003092-01