beautypg.com

Installation precautions, General precautions, Lifting precautions – Brocade FastIron SX Series Chassis Hardware Installation Guide User Manual

Page 54

background image

DANGER

If the installation requires a different power cord than the one supplied with the device, make
sure you use a power cord displaying the mark of the safety agency that defines the
regulations for power cords in your country. The mark is your assurance that the power cord
can be used safely with the device.

Installation precautions

Follow these precautions when installing the chassis.

General precautions

DANGER

All fiber-optic interfaces use Class 1 Lasers.

CAUTION

Do not install the device in an environment where the operating ambient temperature can
exceed 40 ° C (104 ° F).

CAUTION

Make sure the air flow around the front, sides, and back of the device is not restricted.

CAUTION

If you do not install a module in a slot, you must keep the slot panel in place. If you run the
chassis with an uncovered slot, the system will overheat.

CAUTION

Never leave tools inside the chassis.

Lifting precautions

DANGER

A fully populated chassis is heavy. TWO OR MORE PEOPLE ARE REQUIRED WHEN LIFTING,
HANDLING, OR MOUNTING THESE DEVICES.

Installation precautions

52

Brocade FastIron SX Series Chassis Hardware Installation Guide

53-1003092-01