Maintaining the hardware, Overview, Hardware maintenance schedule – Brocade FastIron SX Series Chassis Hardware Installation Guide User Manual
Page 119: Overview hardware maintenance schedule
Maintaining the Hardware
Replacing a switch fabric module (FSX 800 and FSX 1600 only).................................121
Overview
This chapter provides instructions for maintaining the FastIron X Series chassis hardware.
DANGER
The procedures in this manual are for qualified service personnel.
Hardware maintenance schedule
The FastIron X Serieschassis requires minimal maintenance for its hardware components. Brocade
recommends cleaning the fiber-optic connectors on a fiber-optic port and the connected fiber cable
each time you disconnect the cable.
Otherwise, you can replace the following hardware components as needed:
•
Management and interface modules
•
Switch fabric modules (FSX 800 and FSX 1600 only)
•
POE daughter card
•
Copper and fiber optic modules (SFPs (mini-GBICs), SFP+, and XFP transceivers)
•
Power supplies
•
Fan tray
•
Blowers (FSX 800 and FSX 1600 only)
•
Air filters
Brocade FastIron SX Series Chassis Hardware Installation Guide
117
53-1003092-01