Brocade FastIron SX Series Chassis Hardware Installation Guide - Manual (Page 165)

Power supply specifications
This section contains the following information for the power supplies that ship with the FastIron X
Series chassis devices:
• Physical dimensions and weight on page 163
• Environmental considerations on page 163
• Electrical specifications on page 164
• Input connector and plug on page 166
• Safety warnings on page 169
For an overview of the power supplies, refer to Power supplies on page 39.
Physical dimensions and weight
NOTE
Manufacturing part numbers are inscribed on the power supply (top) label.
Physical dimensions and weight of power supplies TABLE 35
Dimensions Weight
Replacement power supplies SX-ACPWR-SYS and SX-ACPWR-POE (manufacturing part numbers 32014-xxx
and 32016-xxx, respectively)
4.19 cm (H) x 10.17 cm (W) x 38.10 cm (D)
1.65 in. (H) x 4.00 in. (W) x 15 in. (D)
2.7 kg (6 lbs)
All other power supplies
4.13 cm (H) x 10.17 cm (W) x 36.19 cm (D)
1.63 in. (H) x 4.00 in. (W) x 14.25 in. (D)
2.7 kg (6 lbs)
Environmental considerations
Environmental considerations for power supplies TABLE 36
Property SX-ACPWR-SYS and SX-ACPWR-
POE SX-DCPWR-SYS and
SX-DCPWR-POE SX-ACPWR2500-POE
Operating Environment
Operating
temperature -0 ° to 40 ° C, 23 ° to 122 ° F -0 ° to 40 ° C, 23 ° to 122
° F -0 ° to 40 ° C, 23 ° to 122 °
F
Relative humidity 0 - 95%, non-condensing 0 - 95%, non-condensing 0 - 95%, non-condensing
Power supply specifications
Brocade FastIron SX Series Chassis Hardware Installation Guide 163
53-1003092-01