Brocade FastIron SX Series Chassis Hardware Installation Guide - Manual (Page 157)

Regulatory compliance
The table below lists the Electromagnetic Compatibility (EMC), Immunity standards, and safety agency
approvals for the FastIron Chassis.
Regulatory compliance TABLE 29
Certifications
Emissions
• Canada Interference Causing Equipment Regulations
• EN 55022 / CISPR-22 Class A / VCCI Class A
• FCC Class A
Electromagnetic
• EN 61000-3-2 Power Line Harmonics
• EN 61000-4-2 ESD
• EN 61000-4-3 Radiated Immunity
• EN 61000-4-4 EFT
• EN 61000-4-5 Surge
• EN 61000-4-6 Low Frequency Common Immunity
• EN 61000-4-11 Voltage Dips and Sags Generic: EN 50082-1
• ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD
• Radiated: IEC 61000-4-3; 3 V/m
• EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
• Conducted: IEC 61000-406; 3 V
Safety Agency
• CAN/CSA-C22.2 No. 60950-1-07 / UL 60950-1 - 2nd Edition, Safety of Information Technology Equipment
• EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User’s Guide
• EN 60825-2 Safety of Laser Products - Part 2: Safety of Optical Fibre Communications Systems
• EN 60950-1 / IEC 60950-1 - Safety of Information Technology Equipment
Maximum power consumption
The table below lists the maximum power consumption for the modules and other components in the
Brocade chassis.
NOTE
For a list of part numbers for the Management and Interface modules, refer to the "Management
modules," "FSX 800 and FSX 1600 management modules," and "Interface modules" sections.
Maximum power consumption TABLE 30
Hardware Component Maximum Power
Consumption (Watts) Maximum Number of Components
per Chassis
FSX 800 FSX 1600
Regulatory compliance
Brocade FastIron SX Series Chassis Hardware Installation Guide 155
53-1003092-01