Brocade FastIron SX Series Chassis Hardware Installation Guide - Manual (Page 41)

Network interfaces (Continued) TABLE 14
Interface Show Media Description
10GBase-1310-MMF 1310-MMF
10GBase-CX4 XG-CX4
10GBase-ER XG-ER
10GBase-LR XG-LR
10GBase-SR XG-SR
10GBase-ZR XG-ZR
10GBase-ZRD XG-ZRD
Port regions
Ports on FastIron X Series chassis devices are grouped into regions. For a few features, such as port
monitoring and unknown unicast configurations, you will need to know the region to which a port
belongs. However, for most features, a port region does not affect configuration or operation of the
feature. If a port region does affect configuration or operation of a feature, it is noted and described in
the appropriate feature section of this guide.
• 48-port 10/100/1000 Mpbs Ethernet PoE interface module (two port regions)
‐ Ports 1 - 24 belong to port region 0
‐ Ports 25 - 48 belong to port region 1
• 24-port Gigabit Ethernet copper interface module (two port regions)
‐ Ports 1 - 12 belong to port region 0
‐ Ports 13 - 24 belong to port region 1
• 48-port Gigabit Ethernet Copper Interface Module
‐ Ports 1 - 48
• 24-port Gigabit Ethernet fiber interface module (two port regions)
‐ Ports 1 - 12 belong to port region 0
‐ Ports 13 - 24 belong to port region 1
• 2-port 10-Gigabit Ethernet fiber interface module (two port regions)
‐ Port 1 belongs to port region 0
‐ Port 2 belongs to port region 1
• 8-port 10-Gigabit Ethernet interface module (two port regions)
‐ Ports 1 - 4 belong to port region 0
‐ Ports 5 - 8 belong to port region 1
Power supplies
FastIron X Series chassis devices ship with one or two power supplies, depending on how they are
ordered from the factory.
Port regions
Brocade FastIron SX Series Chassis Hardware Installation Guide 39
53-1003092-01