Brocade FastIron SX Series Chassis Hardware Installation Guide - Manual (Page 21)

Hardware features
● FSX 800 chassis............................................................................................................. 19
● FSX 1600 chassis........................................................................................................... 21
● Specifying a port address................................................................................................24
● Management modules.....................................................................................................24
The FastIron X Series chassis devices are composed of the following major hardware components:
• Chassis
• Management module
‐ The FSX 800 and FSX 1600 optionally support dual management modules which provide
100% redundancy.
• Separate switch fabric modules (FSX 800 and FSX 1600 only)
• Interface modules
• Power supplies
• The fan tray in the FSX 800 is composed of six fans and a fan control module.
• The FSX 1600 has an air filter in the bottom front of the chassis and two fan trays at the rear of the
chassis.
• Built-in mounting brackets
The following sections provide more information about these components.
For details about physical dimensions, power supply specifications, and pinouts, refer to the “Hardware
Specifications” section.
FSX 800 chassis
The FSX 800 chassis is six rack units in height and contains the following component slots:
• Two half slots for the management modules
• Two half slots for the switch fabric modules
Brocade FastIron SX Series Chassis Hardware Installation Guide 19
53-1003092-01