Brocade FastIron SX Series Chassis Hardware Installation Guide - Manual (Page 164)

Cable length summary table (Continued) TABLE 34
Cable
Type Connector
Type Core
Diameter(microns) Modal
Bandwidth(MHz*km)
or Wavelength (nm) Range
(meters)
100Base-TX Copper RJ-45 jack for
standard
unshielded
twisted pair
(UTP or
Category 5) n/a n/a up to 100
meters
10GBase-CX4 Infiniband
4x copper XAUI connector n/a n/a up to 15
10GBase-1310 MMF LC connector for
XFP module 9 1310 nm up to 200
meters
10GBase-CX4 Copper CX4 connector
for XFP module n/a n/a up to 15
meters
10GBase-ER SMF LC connector for
XFP module 9 1550 nm up to 40000
(40 km)
10GBase-LR SMF LC connector for
XFP module 9 1310 nm 2 - 10000
(10km)
10GBase-SR MMF LC connector for
XFP module 62.5/125 160 2 - 26
62.5/125 200 2 - 33
50/125 400 2 - 66
50/125 500 2 - 82
50/125 2000 2 - 300
10GBase-ZR SMF LC connector for
XFP module 9 1550 nm up to 80000
(80 km)
10GBase-ZRD SMF LC connector for
XFP module 9 1530.33 - 1561.42 nm up to 80000
(80 km)
Power cords
All of the FastIron devices ship with US-compatible power cords unless otherwise specified at the time
of order. United Kingdom- and European-compatible power cords are also available.
Power cords
162 Brocade FastIron SX Series Chassis Hardware Installation Guide
53-1003092-01