Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 337)

Multi-Service IronWare Security Configuration Guide 319
53-1003035-02
Displaying 802.1x information
8
Clearing 802.1x statistics
You can clear the 802.1x statistics counters on all interfaces at once, on individual interfaces, or
on a range of interfaces.
For example, to clear the 802.1x statistics counters on all interfaces on the device, enter the
following command.
Brocade# clear dot1x statistics all
Syntax: clear dot1x statistics all
To clear the 802.1x statistics counters on interface e 3/11, enter the following command.
Brocade# clear dot1x statistics e 3/11
Syntax: clear dot1x statistics [mac-address | ethernet slot/portnum]