Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 283)

Multi-Service IronWare Security Configuration Guide 265
53-1003035-02
Using Secure Copy
5
To download and over-write PBIF FPGA image, enter the following command.
C:> scp @:lp:fpga-pbif:
This command downloads fpga-pbif-file and replaces the FPGA PBIF image on the specified
LP.
C:> scp @:lp:fpga-pbif:all
This command downloads fpga-pbif-file and replaces FPGA PBIF image on all the LPs.
To download and force over-write PBIF FPGA image, enter the following command.
C:> scp
@:lp:fpga-pbif::force-overwrite
This command downloads fpga-pbif-file and replaces FPGA PBIF image on the specified LP.
C:> scp
@:lp:fpga-pbif:all:force-overwrite
This command downloads fpga-pbif-file and replaces the FPGA PBIF image on all the LPs.
STATS FPGA command options
NOTE
STATS FPGA command options are not applicable to the CES or CER.
NOTE
If force-overwrite is present in the command, the command skips compatibility checks and forcibly
replaces the FPGA image, otherwise the command checks for compatibility of the FPGA image and
if the check fails, the FPGA image is not replaced and error message is returned to the SCP client.
To download and over-write STATS FPGA image, enter the following.
C:> scp @:lp:fpga-stats:
This command downloads fpga-stats-file and replaces FPGA STATS image on the specified
LP.
C:> scp @:lp:fpga-stats:all
This command downloads fpga-stats-file and replaces FPGA STATS image on all the LPs.
To download and force over-write STATS FPGA image, enter the following command.
C:> scp
@:lp:fpga-stats::force-overwrite
This command downloads fpga-stats-file and replaces FPGA STATS image on the specified
LP.
C:> scp
@:lp:fpga-stats:all:force-overwrite
This command downloads fpga-stats-file and replaces FPGA STATS image on all the LPs.
XGMAC FPGA command options
NOTE
XGMAC FPGA command options are not applicable to the CES or CER.