Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 254)

236 Multi-Service IronWare Security Configuration Guide
53-1003035-02
system-max ipv6-receive-cam
4
system-max ipv6-receive-cam
Configures the number of IPv6 rACL entries in CAM. The no form of this command removes the
configured limit and restores the default value.
Syntax system-max ipv6-receive-cam num
[no] system-max ipv6-receive-cam num
Command
Default
Parameters num Configures the number of IPv6 rACL entries in CAM. The valid range is from 0
through 8192. The default value is 0.
Command
Modes
Global configuration mode
Usage
Guidelines
Examples The following example configures the number of IPv6 rACL entries in CAM at “4096”.
History
Related
Commands
clear ipv6 access-list receive
ipv6 receive access-list
ipv6 receive deactivate-acl-all
ipv6 receive delete-acl-all
ipv6 receive rebind-acl-all
show ipv6 access-list receive accounting
show ipv6 access-list bindings
system-max ipv6-receive-cam
Brocade(config)# show ipv6 access-list receive accounting name b1
IPv6 Receive ACL Accounting Information:
IPv6 Receive ACL b1
ACL hit count for software processing (accum) 0
HW counters:
0: permit tcp any host 2000::2
Hit count: (1 sec) 0 (1 min) 0
(5 min) 0 (accum) 0
1: permit udp any host 1000::1
Hit count: (1 sec) 0 (1 min) 0
(5 min) 0 (accum) 0
Release Command History
Multi-Service IronWare R05.6.00 This command was introduced.