Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 183)

Multi-Service IronWare Security Configuration Guide 165
53-1003035-02
ip receive deactivate-acl-all
3
ip receive deactivate-acl-all
Deactivates the IPv4 receive access-control list (rACL) configuration and removes all the rules from
Content Addressable Memory (CAM). The no form of this command reactivates the rACL
configuration.
Syntax ip receive deactivate-acl-all
[no] ip receive deactivate-acl-all
Command
Default
Parameters None
Command
Modes
Global configuration mode
Usage
Guidelines
Use the write memory command to save this configuration permanently and to prevent ACL binding
to CAM after reload.
Examples The following example deactivates the IPv4 rACL configuration.
Brocade(config)# ip receive deactivate-acl-all
The following example re-activates the IPv4 rACL configuration.
Brocade(config)# no ip receive deactivate-acl-all
History
Related
Commands
clear access-list receive accounting name
ip receive access-list
ip receive delete-acl-all
ip receive rebind-acl-all
show access-list bindings
show access-list receive accounting
Release Command History
Multi-Service IronWare R05.6.00 This command was introduced.