Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) User Manual

Page 284

266

Multi-Service IronWare Security Configuration Guide

53-1003035-02

Using Secure Copy

NOTE

If force-overwrite is present in the command, the command skips compatibility checks and forcibly
replaces the FPGA image, otherwise the command checks for compatibility of the FPGA image and
if the check fails, the FPGA image is not replaced and error message is returned to the SCP client.

To download and over-write XGMAC FPGA image, enter the following commands.

C:> scp @:lp:fpga-xgmac:

This command downloads fpga-xgmac-file and replaces FPGA XGMAC image on the specified
LP.

C:> scp @:lp:fpga-xgmac:all

This command downloads fpga-xgmac-file and replaces FPGA XGMAC image on all the LPs.

To download and force over-write XGMAC FPGA image, enter the following commands.

C:> scp @:lp:

fpga-xgmac::force-overwrite

This command downloads fpga-xgmac-file and replaces FPGA XGMAC image on the specified
LP.

C:> scp

@:lp:fpga-xgmac:all:force-overwrite

This command downloads fpga-xgmac-file and replaces FPGA XGMAC image on all the LPs.

XPP FPGA command options

NOTE

XPP FPGA command options are not applicable to the CES or CER.

NOTE

To download and over-write an XPP FPGA image, enter the following commands.

C:> scp @:lp:fpga-xpp:

This command downloads fpga-xpp-file and replaces FPGA XPP image on the specified LP.

C:> scp @:lp:fpga-xpp:all

This command downloads fpga-xpp-file and replaces FPGA XPP image on all the LPs.

To download and force over-write XPP FPGA image, enter the following commands.

C:> scp @:lp:fpga-xpp:<

lp-slot-num>:force-overwrite

This command downloads fpga-xpp-file and replaces FPGA XPP image on the specified LP.

C:> scp @:lp:fpga-xpp:all:force-overwrite

This command downloads fpga-xpp-file and replaces FPGA XPP image on all the LPs.