Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 169)

Multi-Service IronWare Security Configuration Guide 151
53-1003035-02
IP receive ACLs
3
Displaying accounting information for rACL
To display rACL accounting information for ACL number “102”, use the following command.
Brocade# show access-list receive accounting 102
To display rACL accounting information for the ACL named “acl_ext1”, use the following command.
Syntax: show access-list receive accounting {acl-num | name acl-name}
The acl-num variable specifies, in number format, the ACL that you want to display rACL statistics
for.
The name acl-name variable specifies, in name format, the ACL that you want to display rACL
statistics for
Clearing accounting information for rACL
To clear rACL accounting information for ACL number “102”, use the following command.
Brocade(config)# clear access-list receive 102
To clear rACL accounting information for a rACL named “acl_ext1”, use the following command.
Brocade(config)# clear access-list receive name acl_ext1
Syntax: clear access-list receive {acl-num | name acl-name}
The acl-num variable specifies the ACL that you want to clear rACL statistics for in number format.
The name acl-name variable specifies clearing accounting statistics for a named IPv4 rACL.
To clear rACL accounting statistics for all configured IPv4 rACLs, enter the following command
Brocade(config)# clear access-list receive all
Syntax: clear access-list receive all
The all parameter specifies clearing accounting statistics for all configured IPv4 rACLs.
Brocade(config)# show access-list receive accounting name acl_ext1
IP Receive ACL Accounting Information:
IP Receive ACL acl_ext1
ACL hit count for software processing (accum) 0
HW counters:
0: permit tcp any host 10.10.10.14
Hit count: (1 sec) 0 (1 min) 0
(5 min) 0 (accum) 0