Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 187)

Multi-Service IronWare Security Configuration Guide 169
53-1003035-02
show access-list receive accounting
3
show access-list receive accounting
Displays accounting information for an IPv4 receive access-control list (rACL).
Syntax show access-list receive accounting {acl-num | name acl-name}
Command
Default
Parameters acl-num Specifies a receive access-control list in number format.
name acl-name Specifies a receive access-control list in name format.
Command
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Command
Output
The show access-list receive accounting command displays the following information:
Examples The following example displays rACL accounting information for an ACL named “acl_ext1”.
History
Related
Commands
clear access-list receive accounting
ip receive access-list
ip receive deactivate-acl-all
ip receive delete-acl-all
ip receive rebind-acl-all
show access-list bindings
Output field Description
IP Receive ACL The ID (name or number) of the receive ACL.
Hit count The number of hits for each counter.
Brocade(config)# show access-list receive accounting name acl_ext1
IP Receive ACL Accounting Information:
IP Receive ACL acl_ext1
ACL hit count for software processing (accum) 0
HW counters:
0: permit tcp any host 10.10.10.14
Hit count: (1 sec) 0 (1 min) 0
(5 min) 0 (accum) 0
Release Command History
Multi-Service IronWare R05.6.00 This command was modified to support named
access-control lists.