Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) User Manual
Page 282
264
Multi-Service IronWare Security Configuration Guide
53-1003035-02
Using Secure Copy
5
To download and over-write the LP secondary image on one LP or all LPs, enter the following
commands.
C:> scp
This command transfers lp-secondary-file to the device and replaces LP Secondary image
in the specified LP slot.
C:> scp
This command transfers lp-secondary-file to the device and replaces the LP Secondary
image in all the LP slots.
Bundled FPGA command options
NOTE
SCP bundled FPGA command options are not applicable to the CES or CER.
NOTE
If force-overwrite is present in the command, the command skips compatibility checks and forcibly
replaces the FPGA image, otherwise the command checks for compatibility of the FPGA image and
if the check fails the FPGA image is not replaced and error message is returned to the SCP client.
To download and over-write Bundled FPGA image, enter the following commands.
C:> scp
This command downloads fpga-bundle-file and replaces all the FPGA images (PBIF, STATS,
XGMAC and XPP) on the specified LP.
C:> scp
This command downloads fpga-bundle-file and replaces all the FPGA images (PBIF, STATS,
XGMAC and XPP) on all the LPs.
To download and force overwrite Bundled FPGA image, enter the following.
C:> scp
This command downloads fpga-bundle-file and replaces all the FPGA images (PBIF, STATS,
XGMAC and XPP) on the specified LP.
C:> scp
This command downloads fpga-bundle-file and replaces all the FPGA images (PBIF, STATS,
XGMAC and XPP) on all the LPs.
PBIF FPGA command options
NOTE
When downloading a PBIF FPGA image onto a CES or CER, either use the keyword all or enter “1” for
the LP slot number.
NOTE
If force-overwrite is present in the command, the command skips compatibility checks and forcibly
replaces the FPGA image, otherwise the command checks for compatibility of the FPGA image and
if the check fails, the FPGA image is not replaced and error message is returned to the SCP client.