Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 252)

234 Multi-Service IronWare Security Configuration Guide
53-1003035-02
show ipv6 access-list receive accounting
4
show ipv6 access-list receive accounting
Displays accounting information for an IPv6 receive access-control list (rACL).
Syntax show ipv6 access-list receive accounting {brief | name acl-name}
Command
Default
Parameters brief Displays IPv6 rACL accounting information in brief
name acl-name Specifies the name of a receive access-control list.
Command
Modes
User EXEC node
Privileged EXEC mode
Global configuration mode
Command
Output
The show ipv6 access-list receive accounting command displays the following information:
Examples The following example displays rACL accounting information for the ACL “b1”.
History
Related
Commands
clear ipv6 access-list receive
ipv6 receive access-list
ipv6 receive deactivate-acl-all
ipv6 receive delete-acl-all
ipv6 receive rebind-acl-all
show ipv6 access-list bindings
Output field Description
IP Receive ACL The name of the IPv6 receive ACL.
Hit count The number of hits for each counter.
Brocade(config)# show ipv6 access-list receive accounting name b1
IPv6 Receive ACL Accounting Information:
IPv6 Receive ACL b1
ACL hit count for software processing (accum) 0
HW counters:
0: permit tcp any host 2000::2
Hit count: (1 sec) 0 (1 min) 0
(5 min) 0 (accum) 0
1: permit udp any host 1000::1
Hit count: (1 sec) 0 (1 min) 0
(5 min) 0 (accum) 0
Release Command History
Multi-Service IronWare R05.6.00 This command was introduced.