Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 281)

Multi-Service IronWare Security Configuration Guide 263
53-1003035-02
Using Secure Copy
5
This command downloads image-file and replaces the mbridge image on the flash.
Switch fabric options
NOTE
SCP switch fabric options are not applicable to the CES or CER.
To download and replace switch fabric file to a single SNM or all in MP, enter the following
command.
C:> scp @:snm:sbridge:
This command downloads image-file and replaces sbridge image on the specified SNM.
To download and replace sbridge image on all SNMs, enter the following command.
C:> scp @:snm:sbridge:all
This command downloads image-file and replaces the sbridge image on all the SNMs.
LP command options
NOTE
SCP LP command options are not applicable to the CES or CER.
To download and over-write the LP boot image on one LP or all LPs, enter the following command.
C:> scp @:lp:boot:
This command transfers lp-boot-image-file to the device and replaces the LP boot image in
the specified LP slot.
C:> scp @:lp:boot:all
This command transfers lp-boot-image-file to the device and replaces LP boot image in all
the LP slots
To download and over-write the LP monitor image on one LP or all LPs, enter the following
command.
C:> scp
@:lp:monitor:
This command transfers lp-monitor-image-file to the device and replaces the LP monitor
image in the specified LP slot.
C:> scp @:lp:monitor:all
This command transfers lp-monitor-image-file to the device and replaces LP monitor
image in all LP slots.
To download and over-write LP primary image on one LP or all LPs, enter the following commands.
C:> scp @:lp:primary:
This command transfers lp-primary-file to the device and replaces the LP Primary image in
the specified LP slot.
C:> scp @:lp:primary:all
This command transfers lp-primary-file to the device and replaces the LP Primary image in
all the LP slots.