Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) - Manual (Page 280)

262 Multi-Service IronWare Security Configuration Guide
53-1003035-02
Using Secure Copy
5
• cspf-group
• bypass-lsp
For backward compatibility, the following syntax is also supported for this command.
C:> scp @:runConfig
Startup configuration command options
To download a configuration file and replace startup configuration, enter the following command.
C:> scp @:config:start
This command transfers config-file to the device and replaces the startup configuration in
flash.
For backward compatibility, the following syntax is also supported for this command.
C:> scp @:startConfig
Combined image command options
NOTE
SCP combined image command options are not applicable to the CES or CER.
To download a combined image file and replace LP and MP primary.
C:> scp @:image:primary
This command transfers combined-image-file to the device and replaces MP and LP Primary image
in flash.
To download a combined image file and replace LP primary and MP secondary.
C:> scp @:image:mp-sec
This command transfers combined-image-file to the device and replaces MP Secondary and
LP Primary image in flash.
To download a combined image file and replace LP secondary and MP primary, enter the following
command.
C:> scp @:image:lp-sec
This command transfers combined-image-file to the device and replaces MP Primary and LP
Secondary image in flash.
To download a combined image file and replace LP and MP secondary, enter the following
command.
C:> scp @:image:secondary
This command transfers combined-image-file to the device and replaces MP and LP
Secondary image in flash.
MBRIDGE command options
NOTE
SCP MBRIDGE command options are not applicable to the CES or CER.
To download and replace FPGA (mbridge) file in MP, enter the following command.
C:> scp @:mbridge