Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 90)

78 Brocade FastIron SX, FCX, and ICX Diagnostic Reference
53-1003076-02
Source Guard debug commands
4
Brocade(config-ntp)# NTP: poll_update: for peer 10.250.229.100 hpoll 6 burst 0
retry 0 throttle 62 next poll 64
NTP: Received NTP server packet from 10.250.229.100 on port 123 via port id mgmt1
at 18:03:09.1891314446 GMT+00 Thu Mar 21 2013
Leap 0, Version 4, Mode server, Stratum 1, Poll 6,
Precision 2**-29, Root delay 0, Root disp 0, Ref Id 10.67.84.83,
Ref time 3572877762.155297680 (18:02:42.155297680 GMT+00 Thu Mar 21 2013)
Org 3572877789.878229501 (18:03:09.878229501 GMT+00 Thu Mar 21 2013)
Rec 3572877789.1401109720 (18:03:09.1401109720 GMT+00 Thu Mar 21 2013)
Xmt 3572877789.1401162509 (18:03:09.1401162509 GMT+00 Thu Mar 21 2013) pkt len
= 48 key 0
NTP: poll_update: for peer 10.250.229.100 hpoll 6 burst 0 retry 0 throttle 62 next
poll 67
Source Guard debug commands
The following debug command display information about the Source Guard transactions.
debug ip source guard
Syntax: [no] debug ip source guard
This command activates the IP source guard debugging.
Brocade# debug ip source guard
SOURCE GUARD: debugging is on
Brocade(config-vif-11)# IPSrcSec: Add ip addr 10.3.3.12 on port 5/1/2 vlan 14
SSH debug commands
The following debug ip ssh command displays information about the Secure Shell (SSH)
transactions.
debug ip ssh
Syntax: [no] debug ip ssh
This command activates the SSH debugging.
Brocade# debug ip ssh
SSH: debugging is on
Brocade(config)#SSH: Incoming connection request received
SSH: ssh_get_free_session_id: ssh.client[0].in_use is 0
SSH: Client session (0) established
SSH: Outgoing connection is ready
ShtcpConnectionStatus[0]: connection established
SSH:ShtcpSend[0]: eSendComplete: the string length [24] !
ShtcpSendStatus[0]: eSendComplete
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [47]