Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual

Page 60

Brocade FastIron SX, FCX, and ICX Diagnostic Reference

53-1003076-02

VXLAN debug commands

[VXLAN]: Update 1 all maps on L2-tunnel 1

[VXLAN]: Create VXLAN map for port 1/1/1, vlan 31, vni 3100, L2-tunnel 1

[VXLAN]: Create VXLAN VPN for vni 3100

[VXLAN]: Success to create VXLAN VPN for vni 3100 with VPN 7000

[VXLAN]: Add access port 1/1/1, vlan 31 to vpn 7000

[VXLAN]: Success to create access egress nexthop 100004

[VXLAN]: Success to create access vxlan port 80000001 for access port 1/1/1 on

vlan 31 in vpn 7000

[VXLAN]: Add network port 1/1/2 to vpn 7000 with existing vxlan port 80000002 on

L2-tunnel 1

[VXLAN]: Success to add network port 1/1/2 to vpn 7000 with new vxlan port

80000002 on L2-tunnel 1

[VXLAN]: Success to create VXLAN map

[VXLAN]: Success to update all maps on L2-tunnel 1

[VXLAN]: bring tunnel id 1 up

[VXLAN]: Create tunnel id 1 with next hop 64 - old next hop is 4

debug l2-tunnel vxlan all

Syntax: [no] debug l2-tunnel vxlan all

This command enables debug of all flows of a VXLAN tunnel. Command output resembles the
following example.

Brocade# debug l2-tunnel vxlan all

[VXLAN]: L2-tunnel 1 - next hop 0.0.0.0 is not router dest - update Tunnel

[VXLAN]: Update 2 all maps on L2-tunnel 1

[VXLAN]: Success to update all maps on L2-tunnel 1[VXLAN]: Create vxlan tables for

L2-tunnel 1

[VXLAN]: Create L3 intf 65535 for L2-tunnel 1

[VXLAN]: Reusing L3 intf 6096 for L2-tunnel 1 with exising L3 intf 65535 which

reused from L2-tunnel 65535

[VXLAN]: Success to create L3 intf 6096 for L2-tunnel 1

[VXLAN]: Create vxlan egress ip tunnel for L2-tunnel 1 with index ffffffff

[VXLAN]: Success to create vxlan egress ip tunnel for L2-tunnel 1 with index

4c000002

[VXLAN]: Create Forward nextHop 65535 for L2-tunnel 1 on network port 1/1/2

[VXLAN]: Success to reuse Forward nexthop 66 for L2-tunnel 1 from L2-tunnel 2 on

network port 1/1/2

[VXLAN]: Create vxlan terminator for L2-tunnel 1

[VXLAN]: Fail to get vxlan terminator on device 0 : Entry not found

[VXLAN]: Success to create vxlan terminator for L2-tunnel 1

[VXLAN]: Success to create vxlan tables for L2-tunnel 1

[VXLAN]: Update 1 all maps on L2-tunnel 1

[VXLAN]: Create VXLAN map for port 1/1/1, vlan 31, vni 3100, L2-tunnel 1

[VXLAN]: Create VXLAN VPN for vni 3100

[VXLAN]: Success to create VXLAN VPN for vni 3100 with VPN 7000

[VXLAN]: Add access port 1/1/1, vlan 31 to vpn 7000

[VXLAN]: Success to create access egress nexthop 100004

[VXLAN]: Success to create access vxlan port 80000001 for access port 1/1/1 on

vlan 31 in vpn 7000

[VXLAN]: Add network port 1/1/2 to vpn 7000 with existing vxlan port 80000002 on

L2-tunnel 1

[VXLAN]: Success to add network port 1/1/2 to vpn 7000 with new vxlan port

80000002 on L2-tunnel 1

[VXLAN]: Success to create VXLAN map

[VXLAN]: Success to update all maps on L2-tunnel 1

[VXLAN]: bring tunnel id 1 up

[VXLAN]: Create tunnel id 1 with next hop 64 - old next hop is 4