Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual

Page 204

192

Brocade FastIron SX, FCX, and ICX Diagnostic Reference

53-1003076-02

show tech-support

STP instance owned by VLAN 10

Global STP (IEEE 802.1D) Parameters:

-----------------------------------

VLAN Root Root Root Prio Max He- Ho- Fwd Last Chg Bridge

ID ID Cost Port rity Age llo ld dly Chang cnt Address

Hex sec sec sec sec sec

10 8000002438c94fc0 0 Root 8000 20 2 1 15 7077 0 002438c94fc0

Port STP Parameters:

-------------------

Port Prio Path State Fwd Design Designated Designated

Num rity Cost Trans Cost Root Bridge

Hex

1/1/7 80 0 DISABLED 0 0 0000000000000000 0000000000000000

1/1/8 80 0 DISABLED 0 0 0000000000000000 0000000000000000

1/1/9 80 0 DISABLED 0 0 0000000000000000 0000000000000000

1/1/10 80 0 DISABLED 0 0 0000000000000000 0000000000000000

802.1W Spanning Tree Information :

---------------------------------

IEEE 802-1w is not configured on port-vlan 1

--- VLAN 2 [ STP Instance owned by VLAN 2 ] ----------------------------

Bridge IEEE 802.1W Parameters:

-----------------------------

Bridge Bridge Bridge Bridge Force tx

Identifier MaxAge Hello FwdDly Version Hold

hex sec sec sec cnt

8000002438c94fc0 20 2 15 Default 3

RootBridge RootPath DesignatedBri- Root Max Fwd Hel

Identifier Cost dge Identifier Port Age Dly lo

hex hex sec sec sec

8000002438c94fc0 0 8000002438c94fc0 Root 20 15 2

Port IEEE 802.1W Parameters:

----------------------------

<--- Config Params --><-------------- Current state ----------------->

Port Pri PortPath P2P Edge Role State Designa- Designated

Num Cost Mac Port ted cost bridge

1/1/6 128 0 F F DISABLED DISABLED 0 0000000000000000

IEEE 802-1w is not configured on port-vlan 10

--- VLAN 11 [ STP Instance owned by VLAN 11 ] ----------------------------