Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 212)

200 Brocade FastIron SX, FCX, and ICX Diagnostic Reference
53-1003076-02
show tech-support cluster
9
show tech-support cluster
Collects and displays complete debugging information related to Multi-Chassis Trunking (MCT)
cluster configuration.
Syntax show tech-support cluster
Parameters None
Modes Privileged EXEC mode
Command
Output
The show tech-support cluster command output includes the output of the show cluster and the
show cluster ccp peer detail commands. The show tech-support cluster command output displays
the following information:
• Cluster configuration
• Spanning Tree Protocol (STP), if configured
• Rapid Spanning Tree Protocol (RSTP), if configured
• Peer details
• Cluster Communication Protocol (CCP)
• Last reason for CCP down
• Inter-Chassis Link (ICL)
• MCT client
• Transmission Control Protocol (TCP) connection
Examples The following example displays sample output from the show tech-support cluster command.
Brocade# show tech-support cluster
Cluster Configuration information
cluster SX 3000 rbridge-id 2 session-vlan 3000 keep-alive-vlan 3001 icl
SX-MCT ethernet 1/7 peer 1.1.1.2 rbridge-id 3 icl SX-MCT deploy client
client-1 rbridge-id 100 client-interface ethernet 1/5
deploy !
Cluster SX 3000
============
Rbridge Id: 3, Session Vlan: 3000, Keep-Alive Vlan: 3001
Cluster State: Deploy
Client Isolation Mode: Loose
Member Vlan Range: 10 20 30
MCT Peer's Reachability using Keep-Alive Vlan: Peer Reachable
ICL Info:
---------
Name Port Trunk
SX-MCT 7/5 4
Peer Info:
----------
Peer IP: 10.20.152.21, Peer Rbridge Id: 2, ICL: SX-MCT
KeepAlive Interval: 10 , Hold Time: 90, Fast Failover
Active Vlan Range: 10 20 30
Last Reason for CCP Down: ICL VE interface down State: CCP Up (Up Time: 0 days:
5 hr:42 min:13 sec)