Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 179)

Brocade FastIron SX, FCX, and ICX Diagnostic Reference 167
53-1003076-02
PIM-SM snooping debug commands
6
pimsm-snoop debug is enabled
debug pimsm-snoop group
Syntax: [no] debug pimsm-snoop group group_address
The group_address is the address of the PIM-SM snoop multicast group.
This command displays the PIM-SM snooping multicast group information. Command output
resembles the following example.
Brocade# debug pim-sm-snoop group 228.228.0.1
Brocade# PIM from 10.27.27.2, vlan 275, e1/1/12 has G=228.228.0.1 with 1 JOIN, 0
PRUNE
pim_snoop join (10.27.27.5 228.228.0.1), from e1/1/12
PIM from 10.27.27.2, vlan 275, port 1/1/12: G=228.228.0.1 Src=10.0.0.1 (1
JOIN, 0 PRUNE)
PIM from 10.27.27.2, vlan 275, e1/1/12 has G=228.228.0.1 with 0 JOIN, 1 PRUNE
pim_snoop prune 1/1/12 from (10.27.27.5, 228.228.0.1), PIM from
10.27.27.2, vlan 275, port 1/1/12: G=228.228.0.1 Src=10.0.0.1 (0 JOIN, 2 PRUNE)
Pim snoop, age oif (* 228.228.0.1) remove e1/1/12, pim_prune=0
debug pimsm-snoop level
Syntax: [no] debug pimsm-snoop level decimal
The decimal variable specifies the debugging level of PIM-SM snooping activity and it can take
values from 1 through 3.
This command sets the debuging level of PIM-SM snooping activity. Level 3 displays more
information than level 2, and level 0 displays no information. Command output resembles the
following example.
Brocade# debug pimsm-snoop level 1
pimsm-snoop debug level is set to 1
Brocade# PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.1 port 1/1/26 on vlan 275
debug pimsm-snoop physical-port ethernet
Syntax: [no] debug pimsm-snoop physical-port ethernet num
The num variable refers to the stack ID, slot number, and port number of a specific Ethernet port.
This command displays the PIM-SM snooping related debug information for the specified Ethernet
interface. Command output resembles the following example.
Brocade# debug pimsm-snoop physical-port ethernet 1/1/12
Brocade# PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Join/Prune from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Join/Prune from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
debug pimsm-snoop show
Syntax: [no] debug pimsm-snoop show
This command displays all the PIM-SM snooping debug settings. Command output resembles the
following example.