Security diagnostics, Acl debug commands, 1x debug commands – Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual
Page 183: Chapter 7
Brocade FastIron SX, FCX, and ICX Diagnostic Reference
171
53-1003076-02
Chapter
7
Security Diagnostics
This chapter contains the following sections:
•
•
•
MAC authentication debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
•
•
•
Web events debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
•
Web authentication debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
•
ACL debug commands
The IP Access Control List (ACL) feature filters traffic based on the information in the IP packet
header. The following command displays the ACL log information.
debug acl log
Syntax: [no] debug acl log
This command sends the ACL log to the CPU for all the packets.
Brocade# debug acl log
Enabling ACL log
802.1x debug commands
The following commands displays information about 802.1x authentication events, activities, and
settings.
debug dot1x events
Syntax: [no] debug dot1x events
This command displays the authentications failed or succeeded and the application of VLANs or
ACLs requested by the Remote Authentication Dial In User Service (RADIUS) server. This command
works globally across all the ports.
Brocade# debug dot1x events
dot1x: Events debugging is on