Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 56)

44 Brocade FastIron SX, FCX, and ICX Diagnostic Reference
53-1003076-02
MCT show commands
3
show mac mdb
Syntax: show mac mdb source-rbridge Rbridge_id client-rbridge Rbridge_id
• source-rbridge Rbridge_id - Specifies the source Rbridge ID.
• client-rbridge Rbridge_id - Specifies the client Rbridge ID.
This command displays the MDB information of the cluster MAC entries. Command output
resembles the following example.
Brocade# show mac mdb source-rbridge 3
Total Local MDB from all ports = 2
Total Remote MDB from all ports = 3
Code- CCL: Cluster Client Local CCR:Cluster Client Remote CL:Local CR:Remote
Total active entries from all ports = 6
MAC Address Port VLAN Type S-RBridge C-RBridge P-Portid Cost Best
0000.0000.0005 4/7 20 CCR 3 100 1 *
0000.0000.0004 4/5 10 CR 3 3 384 1 *
0000.0076.92c0 4/7 20 CCR 3 100 1 *
show mac mdup-stats
Syntax: show mac mdup-stats
This command displays the statistics for MDUP packets as shown in the following example.
Brocade# show mac mdup-stats
MDUP Information
================
MDUP Data buffers in queue : 0
MDUP Statistics
===============
MDUP Update Messages sent: 9
Add Mac sent: 14
Add Intf Mac sent: 0
Del Mac sent: 0
Del Intf Mac sent: 0
Move Mac sent: 0
MDUP Mac Info Messages sent: 19
MDUP Static Mac Messages sent: 0
MDUP Flush Messages sent: 17
MDUP Update Messages received: 6
Add Mac received: 7
Add Intf Mac received: 0
Del Mac received: 2
Del Intf Mac received: 0
Move Mac received: 0
MDUP Mac Info Messages received: 16
MDUP Static Mac Messages received: 0
MDUP Flush Messages received: 11
MDUP Add Mac Errors: 3
MDUP Del MAC Errors: 0
MDUP Move MAC Errors: 0