Rip debug commands – Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual

Page 86

Brocade FastIron SX, FCX, and ICX Diagnostic Reference

53-1003076-02

RIP debug commands

Debug: Jan 1 02:38:55 OSPF: ROUTE CALC end at 96789, pending 0

debug ip ospf vrf

Syntax: [no] debug ip ospf vrf

This command generates debugging information about the OSPF Virtual Routing and Forwarding
(VRF) instance.

Brocade# debug ip ospf vrf

OSPF(one): send hello on area 0 interface 10.3.4.1

RIP debug commands

The following debug commands display debugging information for the Routing Information Protocol
(RIP).

debug rip database

Syntax: [no] debug rip database

This command displays RIP database events.

Brocade# debug rip database

Brocade(config-vif-11)# RIP(default-vrf): (v2) process response packet

header: type:RESPONSE PACKET, version:2

RIP(default-vrf): refresh 10.1.2.0/24 metric 3 from 10.5.5.2 ve 11

RIP(default-vrf): existing route metric 2 from 10.4.4.1 ve 12

RIP(default-vrf): refresh 10.24.2.0/24 metric 4 from 10.5.5.2 ve 11

RIP(default-vrf): existing route metric 4 from 10.5.5.2 ve 11

RIP(default-vrf): (v2) process response packet

header: type:RESPONSE PACKET, version:2

RIP(default-vrf): refresh 10.24.2.0/24 metric 4 from 10.4.4.2 ve 12

RIP(default-vrf): existing route metric 4 from 10.5.5.2 ve 11

debug rip events

Syntax: [no] debug rip events

This command displays RIP events.

Brocade# debug rip events

Brocade(config-vif-11)# RIPng: update timer expired

clear ipv routeRIPng: triggered update

RIPng: garbage prefix 2001:DB8::/64 timer 1, metric 0, tag 0

from :: on interface NULL

RIPng: garbage prefix 2001:DB8::/64 timer 1, metric 0, tag 0

from :: on interface NULL

RIPng: Adding local connected route 2001:DB8::1/64 on interface v11

RIPng: Adding local connected route 2001:DB8::1/64 on interface v12

RIPng: update timer expired

RIPng: Redistribute add route 2001:DB8::/64, type CONNECTED (1/0)