Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual

Page 216

204

Brocade FastIron SX, FCX, and ICX Diagnostic Reference

53-1003076-02

show tech-support stack

( 1 )1/1--1/1| 6 |2/3

--- +---+

peri-ports w/o link: 1/3/1

Standby u5 - No hitless failover. Reason: hitless-failover not configured

Current stack management MAC is 0000.0001.0100

Note: no "stack mac" config. My MAC will change after failover.

Image-Auto-Copy is Disabled.

Stack Port Status Neighbors

Unit# Stack-port1 Stack-port2 Stack-port1 Stack-port2

1 up (1/2/1-1/2/2) dn (1/2/6-1/2/7) U5 (5/2/1-5/2/2) none

5 up (5/2/1-5/2/2) dn (5/2/6-5/2/7) U1 (1/2/1-1/2/2) none

6 up (6/1/1) up (6/2/3) U1 (1/1/1) none

Unit# System uptime

1 23 hours 13 minutes 33 seconds

5 23 hours 13 minutes 32 seconds

6 23 hours 14 minutes 11 seconds

Stack Resource information.

alloc in-use avail get-fail limit get-mem size init

general 12B data 32 3 29 0 7424 3 12 32

RB-tree node 16384 13639 2745 0 237568 14112 18 1024

variable length link 3113 4 3109 0 722216 4 8 3113

AU msg dev0 4092 0 4092 0 16368 0 16 4092

Stack IPC Statistics.

Reliable IPC statistics:

Global statistics:

Pkts rcvd w/no session: 2

Msgs rcvd w/no handler: 0

Unit statistics:

Unit 5 statistics:

Msgs sent: 31650 Msgs received: 18546, Pkt sends failed: 0

Message types sent:

[9]=31645, [10]=3, [11]=2,

Message types received:

[9]=18542, [10]=1, [11]=3,

Session statistics: base-channel, unit 5, channel 0:

Session state: established (last established 23 hours 11 minutes 21 seconds ago)

Connections established: 1

Remote resets: 0, Reset packets sent: 0

Connection statistics (for current connection, if established):

Msgs sent: 22286, Msgs received: 18541

Atomic batches sent: 0, Atomic batches received: 0

Pkts sent: 48417, Pkts received: 46702

Msg bytes sent: 4560292, Msg bytes received: 1628850

Pkt bytes sent: 5950708, Pkt bytes received: 2596884

Flushes requested: 47, Suspends: 0, Resumes: 0

Packets sent with data (DAT), ACKs, and window updates (WND):