Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual
Page 209
Brocade FastIron SX, FCX, and ICX Diagnostic Reference
197
53-1003076-02
show tech-support
9
Compressed Pri Code size = 7091393,
Compressed Sec Code size = 7063608,
Compressed Boot-Monitor Image size = 369292, Version:07.1.00T7f5
Code Flash Free Space = 50462720
DM-Memory Related Information :
memory tracking has run 00:00:00
malloc 0 times, 0 B, free: #0 , 0 B, not in: 0
alloc in-use avail get-fail limit get-mem size init
mem-ptr pool 200 0 200 0 10000 0 12 200
stack pool 100 0 100 0 1000 0 64 100
mem-ptr hash: size=0, anch=503, pool: s=503, use=0, fail=0
stack hash: size=0, anch=209, pool: s=209, use=0, fail=0
show tech-support multicast
Syntax: show tech-support multicast
This command displays the following debugging information specific to Layer 2 and Layer 3
multicast configurations:
•
Multicast VLAN
•
Multicast table
•
Multicast counters
•
Internet Group Management Protocol (IGMP) group
•
Protocol Independent Multicast (PIM) neighbor
•
IP Multicast routing table
The show tech-support multicast command output resembles the following example.
Brocade# show tech-support multicast
IGMP Group :
----------
p-:physical, ST:static, QR:querier, EX:exclude, IN:include, Y:yes, N:no
e3 : 1 groups, 1 group-port
group p-port ST QR life mode source local
1 230.1.1.1 e3 no yes 260 EX 0 YES
PIM Group :
---------
Total number of groups: 1
Index 1 Group 230.1.1.1
Group member at e3: EX 0,
PIM Neighbor :
------------
Total number of neighbors: 1 on 1 ports
Port Phy_p Neighbor Holdtime Age UpTime GenID
e5 e5 10.10.10.20 180 180 480 0x154A3D0E
PIM Cache :
---------
Total 1 entries
Example: (S G) in v40 (e2/3) cnt= : e2/3 is phy. of input v40, cnt: SW hit incl.
drop
HW: CAM switched, SW: cpu switched, OAR: SW one-arm-routing, VL: vlan
trunking: TR(e3/3,e3/4): e3/3 is primary trunk port, e3/4 is real out p.
Gre tnnl(OIF): tn5:e1/1: e1/1 is tunnel out-port