Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual

Page 192

180

Brocade FastIron SX, FCX, and ICX Diagnostic Reference

53-1003076-02

supportsave commands

•

The supportsave command cannot be added to the custom commands list. Also, the
commands which change the CLI mode (exit, quit, end) and commands which restart the
router (switchover, reload, reload-yes) must not be added.

•

Modifying the custom commands list using the supportsave add-cmd or supportsave del-cmd
commands is not allowed while the supportsave data collection is in progress.

•

Time taken by the supportsave command depends on the commands present in the list.

•

The supportsave command does not support collecting crash logs from standby units in a
mixed stack.

•

The supportsave core command can collect core logs from one of the Brocade ICX 6450 units
in the mixed stack.

•

User tags cannot be added when collecting core logs from Brocade ICX 6450 units in a mixed
stack.

•

The supportsave all command will not collect core logs from Brocade ICX 6450 units in a mixed
stack.

Table 2

displays the individual Brocade FastIron devices and the supportsave commands they

support.

TABLE 2

Supported supportsave commands

supportsave commands

Mixed stacking

Brocade ICX 6430
Brocade ICX 6450
Brocade ICX 6650
Brocade ICX 7750
Brocade FastIron SX

Brocade ICX 6610
Brocade FCX

Brocade ICX 6610

Brocade ICX 6450

supportsave all

Supported

supportsave os

Not supported

Supported

Not supported

supportsave core

Supported

Not supported

supportsave l2

Supported

supportsave l3

Supported

supportsave custom

Supported

supportsave platform

Supported

supportsave show

Supported

supportsave cancel

Supported

supportsave

add_cust_cmd index

Supported

supportsave

del_cust_cmd index

Supported

supportsave

del_cust_cmd all

Supported

supportsave

list_cust_cmd

Supported

supportsave info
enable

Supported

supportsave info

disable

Supported