Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 60)

User action Applicable AAA operations
EXEC accounting Start:
aaa accounting exec default start-stop method-list
System accounting Start:
aaa accounting system default start-stop method-list
User logs out of Telnet/SSH session Command authorization for logout command:
aaa authorization commands privilege-level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop method-
list
EXEC accounting stop:
aaa accounting exec default start-stop method-list
User enters system commands
(for example, reload , boot system )
Command authorization:
aaa authorization commands privilege -level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop method-
list
System accounting stop:
aaa accounting system default start-stop method-list
User enters the command:
[no] aaa accounting system defaultstart-stop
method-list
Command authorization:
aaa authorization commands privilege-level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop method-
list
System accounting start:
aaa accounting system default start-stop method-list
User enters other commands Command authorization:
aaa authorization commands privilege-level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop method-
list
AAA security for commands pasted Into the running-config
If AAA security is enabled on the device, commands pasted into the running-config are subject to the
same AAA operations as if they were entered manually.
When you paste commands into the running-config, and AAA command authorization or accounting,
or both, are configured on the device, AAA operations are performed on the pasted commands. The
AAA security for commands pasted Into the running-config
60 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03