Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 317)

Customizing the login button
You can customize the Login button that appears on the bottom of the Web Authentication Login page.
To do so, enter a command such as the following.
device(config-vlan-10-webauth)#webpage custom-text login-button "Press to Log In"
Syntax: [no] webpage custom-text login-button text
For text , enter up to 32 alphanumeric characters.
To reset the Login button back to the default value ("Login"), enter the command no webpage custom-
text login-button .
Customizing the footer
You can customize the footer that appears on all Web Authentication pages.
To customize the footer enter a command such as the following.
device(config-vlan-10-webauth)#webpage custom-text bottom "Network One Copyright
2010"
Syntax: [no] webpage custom-text bottom text
For text , enter up to 255 alphanumeric characters.
To reset the footer back to the default text, enter the command no webpage custom-text bottom. The
default text is "This network is restricted to authorized users only. Violators may be subjected to legal
prosecution. Activity on this network is monitored and may be used as evidence in a court of law.
Copyright 2009 Brocade Communications, Inc."
Displaying web authentication information
The following sections present the show commands you can use to display information about the Web
Authentication feature.
Displaying the web authentication configuration
Enter the show webauth command to display the configuration for the Web Authentication feature.
device#show webauth
=============================================================================
WEB AUTHENTICATION (VLAN 25): Enable
attempt-max-num: 5 (Default)
host-max-num: 0 (Default)
block duration: 90 (Default)
cycle-time: 600 (Default)
port-down-authenticated-mac-cleanup: Enable (Default)
reauth-time: 28800 (Default)
authenticated-mac-age-time: 3600 (Default)
dns-filter: Disable (Default)
authentication mode: username and password (Default)
authentication methods: radius
Local user database name:
Radius accounting: Enable (Default)
Trusted port list: None
Secure Login (HTTPS): Enable (Default)
Web Page Customizations:
Top (Header): Default Text
Displaying web authentication information
FastIron Ethernet Switch Security Configuration Guide 317
53-1003088-03