Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 277)

0000.0000.0321 18/1 87 No 00d01h03m17s H52 Ena
0000.0000.0259 18/1 87 No 00d01h03m17s H52 Ena
0000.0000.0065 18/1 87 Yes 00d01h03m17s Ena Ena
0000.0000.0385 18/1 87 No 00d01h03m17s H52 Ena
0000.0000.0191 18/1 87 Yes 00d01h03m17s Ena Ena
0000.0000.02bd 18/1 87 No 00d01h03m17s H52 Ena
0000.0000.00c9 18/1 87 No 00d01h03m17s H52 Ena
000f.ed00.01f5 18/1 87 Yes 00d01h03m17s Ena Ena
Syntax: show auth-mac-address ethernet port
The following table explains the information in the output.
Output of show auth-mac-address TABLE 32
Field Description
MAC Address The MAC addresses learned on the port. If the packet for which multi-device port authentication
was performed also contained an IP address, the IP address is also displayed.
Port ID of the port on which the MAC address was learned.
VLAN VLAN of which the port is a member.
Authenticated Whether the MAC address has been authenticated by the RADIUS server.
Time The time the MAC address was authenticated. If the clock is set on the Brocade device, then the
actual date and time are displayed. If the clock has not been set, the time is displayed relative to
when the device was last restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicates if 802.1X authentication is enabled or disabled for the MAC address
Displaying multi-device port authentication settingsand authenticated
MAC addresses
To display the multi-device port authentication settings and authenticated MAC addresses for a port
where the feature is enabled, enter the following command.
Syntax: show auth-mac-address [ detail ] [ ethernet port ]
Omitting the ethernetport parameter displays information for all interfaces where the multi-device port
authentication feature is enabled.
device#show auth-mac-addresses detailed ethernet 15/23
Port : 15/23
Dynamic-Vlan Assignment : Enabled
RADIUS failure action : Block Traffic
Failure restrict use dot1x : No
Override-restrict-vlan : Yes
Port Default VLAN : 101 ( RADIUS assigned: No) (101)
Port Vlan State : DEFAULT
802.1x override Dynamic PVID : YES
override return to PVID : 101
Original PVID : 101
DOS attack protection : Disabled
Accepted Mac Addresses : 1
Rejected Mac Addresses : 0
Authentication in progress : 0
Displaying multi-device port authentication settingsand authenticated MAC addresses
FastIron Ethernet Switch Security Configuration Guide 277
53-1003088-03