Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 57)

Switch. For configuration details, see "Specifying a single source interface for specified packet types"
section in the FastIron Ethernet Switch Layer 3 Routing Configuration Guide .
Displaying TACACS/TACACS+ statistics andconfiguration information
The show aaa command displays information about all TACACS+ and RADIUS servers identified on
the device.
device#show aaa
Tacacs+ key: foundry
Tacacs+ retries: 1
Tacacs+ timeout: 15 seconds
Tacacs+ dead-time: 3 minutes
Tacacs+ Server: 10.95.6.90 Port:49:
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius dead-time: 3 minutes
Radius Server: 10.95.6.90 Auth Port=1645 Acct Port=1646:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
no connection
The following table describes the TACACS/TACACS+ information displayed by the show aaa
command.
Output of the show aaa command for TACACS/TACACS+ TABLE 5
Field Description
Tacacs+ key The setting configured with the tacacs-server key command. At the Super User privilege
level, the actual text of the key is displayed. At the other privilege levels, a string of periods
(....) is displayed instead of the text.
Tacacs+ retries The setting configured with the tacacs-server retransmit command.
Tacacs+ timeout The setting configured with the tacacs-server timeout command.
Tacacs+ dead-time The setting configured with the tacacs-server dead-time command.
Tacacs+ Server For each TACACS/TACACS+ server, the IP address, port, and the following statistics are
displayed:
• opens - Number of times the port was opened for communication with the server
• closes - Number of times the port was closed normally
• timeouts - Number of times port was closed due to a timeout
• errors - Number of times an error occurred while opening the port
• packets in - Number of packets received from the server
• packets out - Number of packets sent to the server
connection The current connection status. This can be "no connection" or "connection active".
Displaying TACACS/TACACS+ statistics andconfiguration information
FastIron Ethernet Switch Security Configuration Guide 57
53-1003088-03