beautypg.com

Information – Brocade FastIron Ethernet Switch Security Configuration Guide User Manual

Page 274

background image

1/22 100 0 0 0

4/5 30 0 0 0

Syntax: show auth-mac-address

The following table describes the information displayed by the show auth-mac-address command.

Output from the show authenticated-mac-address command

TABLE 29

Field

Description

Port

The port number where the multi-device port authentication feature is enabled.

Vlan

The VLAN to which the port has been assigned.

Accepted MACs

The number of MAC addresses that have been successfully authenticated

Rejected MACs

The number of MAC addresses for which authentication has failed.

Attempted-MACs

The rate at which authentication attempts are made for MAC addresses.

Displaying multi-device port authenticationconfiguration information

To display information about the multi-device port authentication configuration, enter the show auth-
mac-address configuration
command.

device#show auth-mac-address configuration

Feature enabled : Yes

Number of Ports enabled : 4

--------------------------------------------------------------------------

Port Fail-Action Fail-vlan Dyn-vlan MAC-filter

--------------------------------------------------------------------------

1/18 Block Traffic 1 No No

1/20 Block Traffic 1 No No

1/22 Block Traffic 1 No Yes

4/5 Block Traffic 1 No No

Syntax: show auth-mac-address configuration

The following table describes the output from the show auth-mac-address configuration command.

Output from theshow authenticated-mac-address configuration command

TABLE 30

Field

Description

Feature enabled

Whether multi-device port authentication is enabled on the Brocade device.

Number of Ports enabled The number of ports on which the multi-device port authentication feature is enabled.

Port

Information for each multi-device port authentication-enabled port.

Fail-Action

What happens to traffic from a MAC address for which RADIUS authentication has
failed either block the traffic or assign the MAC address to a restricted VLAN.

Fail-vlan

The restricted VLAN to which non-authenticated MAC addresses are assigned, if the
Fail-Action is to assign the MAC address to a restricted VLAN.

Displaying multi-device port authenticationconfiguration information

274

FastIron Ethernet Switch Security Configuration Guide

53-1003088-03