Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 226)

For example, to display port security statistics for interface module 7, enter the show port security
statistics command.
device#show port security statistics 7
Module 7:
Total ports: 0
Total MAC address(es): 0
Total violations: 0
Total shutdown ports 0
Syntax: show port security statistics module
The following table describes the output from the show port security statisticsmodule command.
Output from the show port security statisticsmodule command TABLE 24
Field Description
Total ports The number of ports on the module.
Total MAC address(es) The total number of secure MAC addresses on the module.
Total violations The number of security violations encountered on the module.
Total shutdown ports The number of times that ports on the module shut down as a result of security
violations.
Displaying restricted MAC addresses on a port
To display a list of restricted MAC addresses on a port, enter a command such as the following.
device#show port security ethernet 1/5 restricted-macs
Syntax: show port security ethernet port restricted-macs
Displaying restricted MAC addresses on a port
226 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03