Displaying port security information, Displaying port security settings, Displaying the secure mac addresses – Brocade FastIron Ethernet Switch Security Configuration Guide User Manual
Page 224
Displaying port security information
You can display the following information about the MAC port security feature:
• The port security settings for an individual port or for all the ports on a specified module
• The secure MAC addresses configured on the device
• Port security statistics for an interface or for a module
Displaying port security settings
You can display the port security settings for an individual port or for all the ports on a specified
module. For example, to display the port security settings for port 7/11, enter the following command.
Brocade#show port security ethernet 7/11
Port Security Violation Shutdown-Time Age-Time Max-MAC
----- -------- --------- ------------- --------- -------
7/11 disabled shutdown 10 10 1
Syntax: show port security ethernet port
Output from the show port security ethernet command
TABLE 21
Field
Description
Port
The slot and port number of the interface.
Security
Whether the port security feature has been enabled on the interface.
Violation
The action to be undertaken when a security violation occurs, either "shutdown" or "restrict".
Shutdown-Time The number of seconds a port is shut down following a security violation, if the port is set to
"shutdown" when a violation occurs.
Age-Time
The amount of time, in minutes, MAC addresses learned on the port will remain secure.
Max-MAC
The maximum number of secure MAC addresses that can be learned on the interface.
Displaying the secure MAC addresses
To list the secure MAC addresses configured on the device, enter the following command.
device#show port security mac
Port Num-Addr Secure-Src-Addr Resource Age-Left Shutdown/Time-Left
----- -------- --------------- -------- --------- ------------------
7/11 1 0000.018.747c Local
10 no
Syntax: show port security mac
The following table describes the output from the show port security mac command.
Displaying port security information
224
FastIron Ethernet Switch Security Configuration Guide
53-1003088-03