Reading nxt-chg led indicator, Charging the nxt-bp batteries using the nxt-chg, Recalibrating the batteries – AMX Modero NXT-1200V User Manual
Page 39
Touch Panel Accessories
27
NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
Reading NXT-CHG LED Indicator
FIG. 32 shows the components on the NXT-CHG Smart Battery Charger.
There is one LED indicator on the front of each battery slot that indicates the status of that slot. The blink
patterns for these LEDs are described in the following table:
Charging the NXT-BP batteries using the NXT-CHG
1.
Review the Checking the NXT-BP battery charge section on page 22 to confirm the percentage of charge
remaining on the batteries.
2.
Provide power to the charger (as outlined in the Powering the NXT-CHG section on page 26).
3.
Align the battery connector with the corresponding charge slot within each of the two NXT-CHG slots.
4.
Firmly insert the battery into the desired slot until the battery is both securely located within the slot and
there is activity from the corresponding Slot LED. Refer to the Reading NXT-CHG LED Indicator section
on page 27 section for LED information.
Recalibrating the batteries
The recalibration process increases the accuracy of the battery charge level. Recalibration of the batteries is
only done upon request from the Modero on-screen Battery Base page. Refer to the Battery Base Page section
on page 93 for more detailed Battery Base page information.
1.
Place the selected battery securely into Slot 1 (left slot) until there is activity on the Slot 1 LED.
2.
Push the Recalibration pushbutton (located between the two slots) to initiate recalibration in the left bay
only.
FIG. 32
Component locations on the NXT-CHG
• Off:
No battery detected.
• Green Flashing: Fast
charging.
• Green Solid: Fully
charged.
• Yellow Flashing: Recalibration in process.
• Yellow/Green: Recalibration
complete.
• Yellow Solid:
Standby (waiting for other battery to charge).
• Red Flash:
Error (problem with either the battery connection to the internal slot, or with
the battery itself).
Slot 1
LED
Slot 2
LED
Recalibrate
Pushbutton
Slot 1
Slot 2
(recalibration)
Recalibration can only be done with Slot 1 on the NXT-CHG.