beautypg.com

Input mask ranges, Input mask next field characters, Input mask operations – AMX Modero NXT-1200V User Manual

Page 169: Input mask literals

background image

Appendix

157

NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel

Input Mask Ranges

These ranges allow a user to specify the minimum and maximum numeric value for a field.
Only one range is allowed per field. Using a range implies a numeric entry ONLY.

An example from the above table:

[0|255] This allows a user to enter a value from 0 to 255.

Input Mask Next Field Characters

These characters allow you to specify a list of characters that cause the keyboard to move the focus to the next
field when pressed instead of inserting the text into the text area.

An example from the above table:

{.} or {:} or {.:} Tells the system that after a user hits any of these keys, proceed to the next
text area input box.

Input mask operations

Input Mask Operators change the behavior of the field in the following way:

Input mask literals

To define a literal character, enter any character, other than those shown in the above table (including spaces,
and symbols)
. A back-slash ('\') causes the character that follows it to be displayed as the literal character. For
example, \A is displayed just as the letter A. To define one of the following characters as a literal character,
precede that character with a back-slash. Text entry operation using Input Masks.

A keyboard entry using normal text entry is straightforward. However, once an input mask is applied, the
behavior of the keyboard needs to change to accommodate the input mask's requirement. When working with
masks, any literal characters in the mask will be "skipped" by any cursor movement including cursor keys,
backspace, and delete.

When operating with a mask, the mask should be displayed with placeholders. The "-" character should
display where you should enter a character. The arrow keys will move between the "-" characters and allow
you to replace them. The text entry code operates as if it is in the overwrite mode. If the cursor is positioned on
a character already entered and you type in a new (and valid) character, the new character replace the old
character. There is no shifting of characters.

When working with ranges specified by the [] mask, the keyboard allows you to enter a number between the
values listed in the ranges. If a user enters a value that is larger than the max, the maximum number of right-
most characters is used to create a new, acceptable value.



Example 1: If you type "125" into a field accepting 0-100, then the values displayed will be "1",
"12", "25".



Example2: If the max for the filed was 20, then the values displayed will
be "1", "12", "5".

Input Mask Ranges

Character Meaning

[

Start range

]

End range

|

Range Separator

Input Mask Next Field Char

Character Meaning

{

Start Next Field List

}

End Next Field List

Input Mask Operators

Character Meaning

<

Forces all characters to be converted to lowercase

>

Forces all characters to be converted to uppercase

^

Sets the overflow flag for this field