AMX Modero NXT-1200V - Manual (Page 144)

Programming
132 NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
"^" Button Commands (Cont.)
^JSB
Set bitmap/
picture alignment
using a numeric
keypad layout for
those buttons with
a defined address
range.
The alignment of 0 is followed by ',,'. The left and top coordinates are relative to
the upper left corner of the button.
Syntax:
"'^JSB-,,alignment>'"Variable: variable text address range = 1 - 4000.button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state). new text alignment = Value of 1 - 9 corresponds to the following locations: Example:SEND_COMMAND Panel,"'^JSB-500.504&510.515,1&2,1'"Sets the off/on state picture alignment to upper left corner for those buttons with variable
text ranges of 500-504 & 510-515.^JSISet icon
alignment using a
numeric keypad
layout for those
buttons with a
defined address
range.The alignment of 0 is followed by ',,'. The left and top coordinates are relative to
the upper left corner of the button.Syntax: "'^JSI-,,alignment>'"Variable: variable text address range = 1 - 4000.button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).new icon alignment = Value of 1 - 9 corresponds to the following locations: Example:SEND_COMMAND Panel,"'^JSI-500.504&510.515,1&2,1'"Sets the Off/On state icon alignment to upper left corner for those buttons with variable text
range of 500-504 & 510-515.1478963250Zero can be used for an absolute position1478963250Zero can be used for an absolute position
alignment>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
new text alignment = Value of 1 - 9 corresponds to the following locations:
Example:
SEND_COMMAND Panel,"'^JSB-500.504&510.515,1&2,1'"
Sets the off/on state picture alignment to upper left corner for those buttons with variable
text ranges of 500-504 & 510-515.
^JSI
Set icon
alignment using a
numeric keypad
layout for those
buttons with a
defined address
range.
The alignment of 0 is followed by ',,'. The left and top coordinates are relative to
the upper left corner of the button.
Syntax:
"'^JSI-,
alignment>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
new icon alignment = Value of 1 - 9 corresponds to the following locations:
Example:
SEND_COMMAND Panel,"'^JSI-500.504&510.515,1&2,1'"
Sets the Off/On state icon alignment to upper left corner for those buttons with variable text
range of 500-504 & 510-515.
1
4
7 8 9
6
3 2
5
0
Zero can be used for an absolute position
1
4
7 8 9
6
3 2
5
0
Zero can be used for an absolute position