AMX Modero NXD-700Vi User Manual
Modero, Nxd-700vi
Table of contents
Document Outline
- Modero NXD-700Vi Operation/Reference Guide
- Introduction
- NXA-AVB/ETHERNET Breakout Box
- NXD-700Vi Touch Panel Accessories
- NXA-CFSP Compact Flash (FG2116-7x)
- Installation and Upgrade of the Internal NXD Components
- Installation
- Installing the No-Button Trim Ring
- Installing the Button Trim Ring
- Pre-Wall Installation of the Conduit Box
- Installation of an NXD Touch Panel
- Wiring Guidelines for the NXD-700Vi Panels
- Audio/Video Port: Connections and Wiring
- Ethernet/RJ-45 Port: Connections and Wiring
- USB Port: Connecting and Using Input Devices
- Panel Calibration
- Configuring Communication
- Modero Setup and System Settings
- Wireless Settings Page - Wireless Access Overview
- Configuring a Wireless Network Access
- Step 1: Configure the Panel’s Wireless IP Settings
- Step 2: Configure the Card’s Wireless Security Settings
- Step 3: Choose a Master Connection Mode
- Using G4 Web Control to Interact with a G4 Panel
- Using your NetLinx Master to control the G4 panel
- Upgrading Modero Firmware
- Firmware Pages and Descriptions
- Setup Navigation Buttons
- Setup Page
- Information
- Protected Setup Navigation Buttons
- Protected Setup Page
- System Settings Page
- Wireless Settings Page
- Secondary Connection Page
- Wireless Security Page
- Open (Clear Text) Settings
- Static WEP Settings
- WPA-PSK Settings
- EAP-LEAP Settings
- EAP-FAST Settings
- EAP-PEAP Settings
- EAP-TTLS Settings
- EAP-TLS Settings
- Client certificate configuration
- Calibration Page
- G4 Web Control Page
- Sensor Setup
- Making the most of the Automated Brightness Control feature (DIM Mode)
- Other Settings
- Tools
- EAP Security & Server Certificates
- Full Duplex Intercom
- Programming
- Appendix A: Text Formatting
- Appendix B - Wireless Technology
- Appendix C: Troubleshooting